Regular stock of frequently used spare parts and wear parts to ensure timely delivery in case of urgent need.
Роторы и статоры различных моделей
Уплотнительные кольца различных моделей
Валы, штифты и втулки различных моделей
The centrifugal chemical pump made of fluoroplastic type FSC (hereinafter referred to as the pump) developed by our company is a single-stage, single-pass cantilever centrifugal pump. It is manufactured using superior hydraulic design and advanced, proven processing technology.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Hardness ions (calcium, magnesium) in the boiler feed water enter into a chemical reaction at high temperatures or crystallize when the saturation concentration is reached, forming an insoluble scale that adheres tightly to the heated surfaces of the boiler.
Диаметр: DN15–DN1200; Давление: PN16–PN160, Class150–Class2500; Материал корпуса: WCB, нержавейка 304/316, дуплексная сталь; Присоединение: фланцевое, резьбовое, под сварку, хомутовое; Привод: ручной, пневматический, электрический, гидравлический.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
Technical parameters: capacity up to 140 m³/h, pressure up to 24 bar
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
Equipment for automatic and precise dosing of chemical reagents into circulating cooling water systems, boiler plants or other water systems. Its main purpose is to prevent scale formation, corrosion and biological fouling (algae, bacteria) in the system by dosing certain chemicals, thereby ensuring its safe, stable and efficient operation.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
The DG series segmental multistage centrifugal pumps use tension pins to connect the suction section, intermediate sections and discharge section into a single unit.
Can pump clean water and slightly contaminated water with temperatures up to 40°C and pH 4–10; the maximum diameter of passing particles is 100 mm.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
