◆ Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
◆ Эксплуатационные характеристики: может устанавливаться в бассейнах или резервуарах разной глубины. The stator and rotor are partially immersed in liquid. Редукторный двигатель находится над уровнем жидкости. Всасывающий патрубок насоса расположен на дне бассейна (у дна резервуара). Fastening is carried out using support feet - very stable during operation. Suitable for deep underground placement or for conditions requiring lowering (immersion) into a container.
◆ Application area: wastewater, chemical industry, petroleum industry, food industry, etc.
The self-priming acid- and alkali-resistant pump can operate without water - the duration of operation depends on the size of the cooling chamber.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
DN15–DN1800; PN10–PN320, Class150–Class1500; carbon steel, stainless steel, cast iron; flange, thread, welding; rotary, lifting, disk types.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
Technical parameters: minimum flow rate up to 0.03 l/min, pressure up to 24 bar
SKF bearings, a world famous brand, provide more stable performance.
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of ammonia water (NH₂OH) or liquid ammonia (NH₃) to the boiler feed water to increase the pH of the feed water (usually maintained in the range of 8.8–9.3 or depending on specific conditions) allows the formation of a stable protective film of magnetite (Fe₃O₄) on the surface of the metal (for example, carbon steel).
A magnetic centrifugal pump (hereinafter referred to as a magnetic pump) usually consists of an electric motor, a magnetic coupling and a corrosion-resistant centrifugal pump. Its main feature is the use of a magnetic coupling to transmit power in a completely leak-free manner.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
