Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported. The grinding function prevents debris in the wastewater from clogging the pump and piping. However, to better ensure pump reliability, it is recommended that a contamination control device be installed in the environment outside the pump.
The cutting module is made of stainless steel and has undergone heat treatment. Лезвия имеют достаточную твёрдость и могут долгое время сохранять высокую режущую способность. If the cutting ability decreases over time, the cutting module can be replaced separately.
Mechanical seals are installed on both the pump and motor sides to ensure reliable double protection of the submersible pump shaft. Масло в масляной камере обеспечивает полную смазку и охлаждение механического уплотнения.
Applications
Лёгкий измельчающий погружной насос WQ/ES в основном используется в муниципальном строительстве, промышленных и бытовых сточных водах, а также на очистных сооружениях для откачки сточных вод, содержащих твёрдые вещества и короткие волокна.
Operating Parameters
◆ Flow: 10–320 m³/h
◆ Head: up to 34 m
◆ Liquid temperature: < 40°C
◆ Плотность жидкости: ≤ 1050 кг/м³
◆ pH: 4–9
The liquid level should not fall below the “▽” mark indicated on the installation dimensions drawing.
Насос нельзя использовать для сильно коррозионных сред и сред с крупными частицами.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
DN15–DN1800; PN10–PN320, Class150–Class1500; carbon steel, stainless steel, cast iron; flange, thread, welding; rotary, lifting, disk types.
Although reagent dosing plants in the petroleum and petrochemical industries do not directly produce products, they are an indispensable “guardian” and “lubricant” in the entire production chain.
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
The self-priming acid- and alkali-resistant pump can operate without water - the duration of operation depends on the size of the cooling chamber.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
The FZX series PTFE self-priming pump is designed and manufactured in accordance with international standards and based on non-metallic pump manufacturing technology. The pump body is made in the form of a metal shell lined with fluoroplastic, and all flow components are made of fluoroplastic alloy.
DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
