The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids. The pump is made of steel lined with ultra-high molecular weight polyethylene (UHMW-PE), which is now the latest generation of corrosion-resistant and wear-resistant engineering plastics for pumps. Its most outstanding advantages are the best wear resistance and toughness (especially at low temperatures) of any plastic, creep resistance (resistance to environmental cracking) and excellent corrosion resistance.
This pump belongs to the cantilever single-stage single-stroke centrifugal pumps. It uses steel lined with ultra-high molecular weight polyethylene, which has excellent corrosion resistance and outstanding wear resistance. The RUB series of corrosion and wear resistant slurry pumps are specifically designed for pumping media that are particularly corrosive and contain fine solids or crystals. They are manufactured using UHMWPE-lined compression molded steel technology to provide excellent corrosion and wear resistance. The design is cantilever with a front opening, the impeller is semi-open (without a front disk), which improves the passage of solid particles and impurities through the working chamber of the pump without clogging. The shaft seal is made of K-type fluorine rubber O-ring with a water cooling jacket, which meets the dual requirements of corrosion resistance and wear resistance. The products in this series have been highly praised by users in industries such as metallurgy, titanium dioxide production, fine chemicals and fertilizer production. In addition, at the customer's request, a fluoroplastic lining can be used depending on the special requirements for corrosion resistance or heat resistance, and non-standard models with special flow and pressure parameters can be manufactured.
This product is widely used for pumping liquids such as acids, alkalis, salts, oils, food, beverages, liquor, organic solvents, etc., especially suitable for transporting highly corrosive media containing fine solid particles.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
The fluoroplastic FOB magnetic pump is a chemical process pump that uses the principle of modern magnetic mechanics and transfers force non-contactly using permanent magnets. As the motor rotates, the outer rotor (outer magnetic system) drives magnetic lines of force that pass through the thermowell and cause the inner rotor (inner magnetic system) and impeller to rotate synchronously.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Technical parameters: capacity up to 140 m³/h, pressure up to 24 bar
Hardness ions (calcium, magnesium) in the boiler feed water enter into a chemical reaction at high temperatures or crystallize when the saturation concentration is reached, forming an insoluble scale that adheres tightly to the heated surfaces of the boiler.
Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
An automated system of equipment for accurately dosing certain chemical reagents into the water being treated (“source water”). The main task is “accurate, continuous, automatic” dosing of reagents, replacing the unstable and ineffective manual method.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
IJ type chemical process pump is a standardized chemical process pump upgraded and improved by our company based on IH pump. This pump adopts a single-stage, single-pass cantilever design, and its operating parameters comply with GB5662-85 standard (equivalent to ISO2858-1975).
The DG series segmental multistage centrifugal pumps use tension pins to connect the suction section, intermediate sections and discharge section into a single unit.
Technical parameters: minimum flow rate up to 0.03 l/min, pressure up to 24 bar
