◆ Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
◆ Performance characteristics: the gearbox is directly connected to the transmission shaft of the pump - compact design, reduced weight, shortened length, ease of maintenance
◆ Applications: pumping of various low and high viscosity media, with or without solid particles, in wastewater, food industry, environmental protection and chemical industries
This pump can operate without water, is not subject to rapid wear, is easy to assemble and maintain, and has a long service life.
The AZ series slurry pump is an extension of the HTZ pump product line, which has been successfully developed by our company based on many years of technical experience and taking into account advanced foreign technologies.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
Regular stock of frequently used spare parts and wear parts to ensure timely delivery in case of urgent need.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
The three-chamber solution preparation unit is designed specifically for dissolving and preparing solutions of high molecular weight polymer – polyacrylamide (PAM). Mainly used for flocculation treatment of industrial wastewater, flocculation in sludge dewatering, drinking water treatment, and wastewater treatment in chemical, pulp and paper and other industries.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
Technical parameters: capacity up to 140 m³/h, pressure up to 24 bar
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of ammonia water (NH₂OH) or liquid ammonia (NH₃) to the boiler feed water to increase the pH of the feed water (usually maintained in the range of 8.8–9.3 or depending on specific conditions) allows the formation of a stable protective film of magnetite (Fe₃O₄) on the surface of the metal (for example, carbon steel).
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
The centrifugal chemical pump made of fluoroplastic type FSC (hereinafter referred to as the pump) developed by our company is a single-stage, single-pass cantilever centrifugal pump. It is manufactured using superior hydraulic design and advanced, proven processing technology.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
Can pump clean water and slightly contaminated water with temperatures up to 40°C and pH 4–10; the maximum diameter of passing particles is 100 mm.
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
