DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
Disc rotates 90°, lightweight compact body, competitive price, easy control, for full shut-off and partial throttling, rubber/PTFE lining protects against acids and alkalis.
Water treatment, ecology, heating and ventilation, pulp industry, flue gas desulfurization, light chemistry.
Technical parameters: capacity up to 140 m³/h, pressure up to 24 bar
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
KQGV frequency controlled digital integrated water supply equipment has many advantages: safe water supply, reliable operation, water saving and hygiene, high efficiency and energy saving, intelligent monitoring and control.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
Using the most advanced welding technology, KQDP/KQDQ has high corrosion resistance and high efficiency. Efficiency can be 5-10% higher than cast pumps.
SKF bearings, a world famous brand, provide more stable performance.
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
