The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
The seal chamber adopts a spiral design, which to a certain extent prevents impurities from sewage from entering the mechanical seal; At the same time, the sealing chamber is equipped with a valve for releasing air. Once the pump has started, air can be removed from the seal chamber to protect the mechanical seal.
The pump has a vertical design and takes up little space; рабочее колесо установлено непосредственно на валу двигателя, без муфты, насос имеет короткие габаритные размеры, простую конструкцию, удобен в обслуживании; Reasonable bearing configuration, short cantilever outreach of the impeller, excellent axial force balancing design make the bearings and mechanical seal more reliable, the pump runs smoothly, vibration and noise are low.
The pump is installed in a dry pump room for ease of maintenance.
At the user's request, it can be equipped with an electrical control cabinet and a float level switch, which allows not only to automatically control the start and stop of the pump depending on changes in the liquid level without the need for special supervision, but also ensures safe and reliable operation of the engine, which is extremely convenient to use.
Applications
WL series small vertical wastewater pumps are mainly used in municipal construction, building construction, industrial wastewater and wastewater treatment. They can be used for pumping sewage, waste water, rainwater and municipal wastewater containing solids and various long fibers.
Operating Parameters
◆ Flow: 10-4500 m³/h
◆ Head: up to 54 m
◆ Температура жидкости: < 80°C
◆ Liquid density: ≤ 1050 kg/m³
◆ pH: 5–9
The liquid level should not fall below the “▽” mark indicated on the installation dimensions drawing.
The pump must not be used to pump highly corrosive liquids or solid particles.
The diameter of solid particles in the liquid should not exceed 80% of the minimum size of the pump flow channel; the length of the fibers in the liquid must be less than the diameter of the pump discharge pipe.
The length can be individually adjusted from 450 to 1000 mm depending on the depth of the customer's tank.
The centrifugal chemical pump made of fluoroplastic type FSC (hereinafter referred to as the pump) developed by our company is a single-stage, single-pass cantilever centrifugal pump. It is manufactured using superior hydraulic design and advanced, proven processing technology.
Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
DN15–DN1800; PN10–PN320, Class150–Class1500; carbon steel, stainless steel, cast iron; flange, thread, welding; rotary, lifting, disk types.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
An automated system of equipment for accurately dosing certain chemical reagents into the water being treated (“source water”). The main task is “accurate, continuous, automatic” dosing of reagents, replacing the unstable and ineffective manual method.
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
The FZX series PTFE self-priming pump is designed and manufactured in accordance with international standards and based on non-metallic pump manufacturing technology. The pump body is made in the form of a metal shell lined with fluoroplastic, and all flow components are made of fluoroplastic alloy.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
Technical parameters: capacity up to 300 m³/h, pressure up to 48 bar
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
Although reagent dosing plants in the petroleum and petrochemical industries do not directly produce products, they are an indispensable “guardian” and “lubricant” in the entire production chain.
