◆ Technical parameters: productivity up to 100 m³/h, pressure up to 48 bar
◆ Эксплуатационные характеристики: всасывающая камера оснащена прямоугольным загрузочным отверстием, а на соединительном стержне (штанге) установлено шнековое (винтовое) подающее устройство, которое эффективно предотвращает накопление среды на входе в насос.
◆ Область применения: перекачка сред с крайне низкой текучестью (подвижностью), содержанием твёрдых частиц 20–30% и без эффекта «сводообразования» (зависания) в природоохранной, пищевой и химической промышленности.
SKF bearings, a world famous brand, provide more stable performance.
The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
The length can be individually adjusted from 450 to 1000 mm depending on the depth of the customer's tank.
Diameter: DN15–DN1200; Pressure: PN16–PN160, Class150–Class2500; Housing material: WCB, stainless steel 304/316, duplex steel; Connection: flange, threaded, welded, clamp; Drive: manual, pneumatic, electric, hydraulic.
DN15–DN1800; PN10–PN320, Class150–Class1500; carbon steel, stainless steel, cast iron; flange, thread, welding; rotary, lifting, disk types.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of ammonia water (NH₂OH) or liquid ammonia (NH₃) to the boiler feed water to increase the pH of the feed water (usually maintained in the range of 8.8–9.3 or depending on specific conditions) allows the formation of a stable protective film of magnetite (Fe₃O₄) on the surface of the metal (for example, carbon steel).
IJ type chemical process pump is a standardized chemical process pump upgraded and improved by our company based on IH pump. This pump adopts a single-stage, single-pass cantilever design, and its operating parameters comply with GB5662-85 standard (equivalent to ISO2858-1975).
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
Technical parameters: capacity up to 300 m³/h, pressure up to 48 bar
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of hydrazine solution to the boiler feedwater reacts chemically with the dissolved oxygen (O₂) in the feedwater to form nitrogen and water.
The fluoroplastic FOB magnetic pump is a chemical process pump that uses the principle of modern magnetic mechanics and transfers force non-contactly using permanent magnets. As the motor rotates, the outer rotor (outer magnetic system) drives magnetic lines of force that pass through the thermowell and cause the inner rotor (inner magnetic system) and impeller to rotate synchronously.
