This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
These single-stage centrifugal pumps have rotating parts that can be disassembled for repairs without removing the casing or inlet and outlet connecting piping.
The manufacturer of centrifugal pumps, the Kaiquan company, uses a separate shaft design, which fundamentally eliminates corrosion damage to the motor shaft and fully ensures stable and reliable operation of the motor for a long time.
This series of centrifugal pumps uses internal type mechanical seals, single end face, unbalanced.
The reliable and innovative pump shaft design of this series of horizontal cantilever chemical pumps makes it easy to select a standard B35 type motor to directly drive the pumps.
The design of this series of chemical pumps for corrosive liquids is very simple and easy to maintain; If it is necessary to replace the pump shaft, it is easy to disassemble and reassemble, and the position fixation is accurate and reliable.
The pump shaft and motor shaft of this series of chemical pumps are connected by a rigid coupling; Advanced and rational processing and assembly technologies ensure high alignment, low vibration and low noise of the pump shaft.
This series of industrial chemical pumps is a monoblock design; Compared to conventional horizontal chemical pumps, its design is particularly compact and the unit footprint is significantly smaller.
Applications
Chemical industry, pumping of petroleum products, food industry, beverage production, medicine, pulp and paper production, water treatment, environmental protection, some acids, alkalis, salts, etc.
Operating Parameters
◆ Расход: 2,2–480 м³/ч
◆ Head: 2.8–129 m
◆ Motor power: 0.12–90 kW
◆ Rotation speed: 1480 rpm or 2960 rpm
◆Maximum working pressure: ≤1.6MPa
◆ Ambient temperature: -10°C ~ 80°C
The FZX series PTFE self-priming pump is designed and manufactured in accordance with international standards and based on non-metallic pump manufacturing technology. The pump body is made in the form of a metal shell lined with fluoroplastic, and all flow components are made of fluoroplastic alloy.
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
The AZ series slurry pump is an extension of the HTZ pump product line, which has been successfully developed by our company based on many years of technical experience and taking into account advanced foreign technologies.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
DN15–DN1800; PN10–PN320, Class150–Class1500; carbon steel, stainless steel, cast iron; flange, thread, welding; rotary, lifting, disk types.
Using the most advanced welding technology, KQDP/KQDQ has high corrosion resistance and high efficiency. Efficiency can be 5-10% higher than cast pumps.
Hardness ions (calcium, magnesium) in the boiler feed water enter into a chemical reaction at high temperatures or crystallize when the saturation concentration is reached, forming an insoluble scale that adheres tightly to the heated surfaces of the boiler.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
Technical parameters: capacity up to 300 m³/h, pressure up to 48 bar
A magnetic centrifugal pump (hereinafter referred to as a magnetic pump) usually consists of an electric motor, a magnetic coupling and a corrosion-resistant centrifugal pump. Its main feature is the use of a magnetic coupling to transmit power in a completely leak-free manner.
The static seal between the suction section, middle section and discharge section of the pump is made of metal seal and double O-ring seal, and the pump shaft seal uses high-performance hemp packing or mechanical seal, which is safe and reliable.
Can pump clean water and slightly contaminated water with temperatures up to 40°C and pH 4–10; the maximum diameter of passing particles is 100 mm.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
The three-chamber solution preparation unit is designed specifically for dissolving and preparing solutions of high molecular weight polymer – polyacrylamide (PAM). Mainly used for flocculation treatment of industrial wastewater, flocculation in sludge dewatering, drinking water treatment, and wastewater treatment in chemical, pulp and paper and other industries.
