Installation in a tank, ability to work without water
1. The length can be customized from 450mm to 1000mm depending on the depth of the customer's tank.
2. All pump parts in contact with liquid are made of FRPP, CFRPP, PVDF materials - depending on the chemical solution being pumped.
3. Double-layer dry shaft seal design prevents chemical vapors from damaging motor bearings.
4. Specially designed impeller: even when rotating backwards, the impeller will not damage the pump.
5. Suitable for various types of acidic and alkali liquid circulation, cooling, spray washing equipment, gas purification towers, wastewater treatment, transportation and pumping of chemical tank liquids.
The product is suitable for low-viscosity liquids that do not contain solid particles or fibres:
◆ Chemical industry;
◆ Pharmaceutical, pesticide, acid washing and dye production; Paint and varnish industry;
◆ Metallurgy, pulp and paper and galvanic industry;
◆ Suitable for highly corrosive environments of any concentration, such as hydrochloric acid, nitric acid, sulfuric acid, phosphoric acid, acids, saline solutions, strong oxidizing agents, organic solvents, etc.
◆ Liquid temperature: –15 °C to +90 °C
◆ Flow range: see pump parameters
◆ Maximum pressure: see pump parameters
◆ Maximum medium density: 135 × 10³ kg/m³
◆ Ambient temperature: no more than +40 °C
◆ Maximum altitude above sea level: 3000 m
◆ Maximum system pressure: 10 bar
When the specific gravity and viscosity of the pumped liquid is high, the shaft power increases, so it is necessary to use an electric motor that matches the shaft power.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
This pump can operate without water, is not subject to rapid wear, is easy to assemble and maintain, and has a long service life.
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
The static seal between the suction section, middle section and discharge section of the pump is made of metal seal and double O-ring seal, and the pump shaft seal uses high-performance hemp packing or mechanical seal, which is safe and reliable.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
The self-priming acid- and alkali-resistant pump can operate without water - the duration of operation depends on the size of the cooling chamber.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
Technical parameters: capacity up to 300 m³/h, pressure up to 48 bar
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
The DG series segmental multistage centrifugal pumps use tension pins to connect the suction section, intermediate sections and discharge section into a single unit.
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
Can pump clean water and slightly contaminated water with temperatures up to 40°C and pH 4–10; the maximum diameter of passing particles is 100 mm.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
