◆ Technical parameters: capacity up to 140 m³/h, pressure up to 24 bar
◆ Performance characteristics: the flow part meets the requirements of food grade, uses a quick-release connection, convenient for disassembly and assembly, equipped with a flushing hole
◆ Applications: transfer of various foodstuffs, chemicals, lithium batteries, pharmaceuticals, household chemicals and other media that require cleanliness
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
The three-chamber solution preparation unit is designed specifically for dissolving and preparing solutions of high molecular weight polymer – polyacrylamide (PAM). Mainly used for flocculation treatment of industrial wastewater, flocculation in sludge dewatering, drinking water treatment, and wastewater treatment in chemical, pulp and paper and other industries.
SKF bearings, a world famous brand, provide more stable performance.
Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
The DG series segmental multistage centrifugal pumps use tension pins to connect the suction section, intermediate sections and discharge section into a single unit.
The centrifugal chemical pump made of fluoroplastic type FSC (hereinafter referred to as the pump) developed by our company is a single-stage, single-pass cantilever centrifugal pump. It is manufactured using superior hydraulic design and advanced, proven processing technology.
Technical parameters: minimum flow rate up to 0.03 l/min, pressure up to 24 bar
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
The self-priming acid- and alkali-resistant pump can operate without water - the duration of operation depends on the size of the cooling chamber.
KQGV frequency controlled digital integrated water supply equipment has many advantages: safe water supply, reliable operation, water saving and hygiene, high efficiency and energy saving, intelligent monitoring and control.
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
