MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter. This is ideal pumping equipment, working in conjunction with filter presses, as well as the best equipment for pumping media containing solid abrasive impurities. It has the advantages of ease of operation, corrosion and abrasion resistance, cost-effectiveness and reliable seals. Suitable for transporting Pengrun clay, carbide residue, lime milk, coal, gypsum slurry and sand containing crude oil.
◆ Alkalis and inorganic salts: milk of lime, salt slurry, carbide residue.
◆ Non-ferrous metallurgy: pulp for the production of aluminum, copper, vanadium and zinc.
◆ Petrochemical industry: sand containing crude oil.
◆ Pulp and paper industry: milk of lime.
◆ Fermentation industry: various fermenting pulps.
◆ Environmental protection at power plants: coal ash, gypsum pulp.
The pump body is designed with axial suction and radial thrust. The pump cover is fixed to the support assembly using a stop, and the pump housing and support assembly clamp the pump cover. During maintenance, after unscrewing the connecting nut between the support unit and the pump housing, the rotating part of the pump can be removed from the housing without dismantling the suction and pressure pipelines. For larger pumps, an intermediate extension adapter is available between the pump coupling and the motor shaft. При обслуживании двигатель не нужно перемещать. By removing the intermediate adapter, you can remove the rotating part from the pump housing. This is an internationally recognized design for chemical pumps.
◆ Максимальное рабочее давление: ≤ 1,6 МПа
◆ Flow range: 20–700 m³/h
◆ Pressure range: 8–80 m
◆ Liquid temperature: -20–180 °C
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
The DG series segmental multistage centrifugal pumps use tension pins to connect the suction section, intermediate sections and discharge section into a single unit.
KQGV frequency controlled digital integrated water supply equipment has many advantages: safe water supply, reliable operation, water saving and hygiene, high efficiency and energy saving, intelligent monitoring and control.
Equipment for automatic and precise dosing of chemical reagents into circulating cooling water systems, boiler plants or other water systems. Its main purpose is to prevent scale formation, corrosion and biological fouling (algae, bacteria) in the system by dosing certain chemicals, thereby ensuring its safe, stable and efficient operation.
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
Using the most advanced welding technology, KQDP/KQDQ has high corrosion resistance and high efficiency. Efficiency can be 5-10% higher than cast pumps.
A magnetic centrifugal pump (hereinafter referred to as a magnetic pump) usually consists of an electric motor, a magnetic coupling and a corrosion-resistant centrifugal pump. Its main feature is the use of a magnetic coupling to transmit power in a completely leak-free manner.
The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
