Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
Suction of water from a low reservoir, loading and unloading of raw materials from tank trucks, operating conditions with periodic air transportation, gas-liquid media. Suitable for pumping various acids, alkalis, salts and organic solvents.
◆ 50 ZFT -32
◆ 50 — Suction pipe diameter 50 mm
◆ ZFT - PTFE self-priming magnetic pump
◆ 32 - Head 32 m
When choosing a pump in our company, you should take into account the installation height. The vertical distance between the suction level and the pump shaft must be less than the installation height specified for the pump.
The following formula is used for calculation:
Hsz ≤ Ha - Hv - ΔHs - (NPSH)r
where:
Hsz - Fixed installation height (m)
Ha — Atmospheric pressure at the installation site (m water column)
Hv - Vaporization pressure of a liquid at a given temperature (m)
Hs - Pressure loss in the suction pipe (m)
NPSH - Permissible cavitation head specified in the parameter table (m)
Pump power means the input power of the pump, denoted by N.
Output power is the net power transferred by the pump to the fluid as it passes through the pump, denoted Ne.
Ne = (ρ × g × Q × H) / 3600
where:
Ne — Shaft power (W)
ρ — Liquid density (kg/m³)
g — Gravity acceleration (m/s²)
Q - Flow (m³/h)
H - Head (m)
Input power and output power are not equal because power loss occurs in the pump. The amount of losses is usually estimated by the efficiency of the pump. Efficiency is denoted by η. Pump efficiency is the ratio of power output to power input.
The static seal between the suction section, middle section and discharge section of the pump is made of metal seal and double O-ring seal, and the pump shaft seal uses high-performance hemp packing or mechanical seal, which is safe and reliable.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Regular stock of frequently used spare parts and wear parts to ensure timely delivery in case of urgent need.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
SKF bearings, a world famous brand, provide more stable performance.
The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of ammonia water (NH₂OH) or liquid ammonia (NH₃) to the boiler feed water to increase the pH of the feed water (usually maintained in the range of 8.8–9.3 or depending on specific conditions) allows the formation of a stable protective film of magnetite (Fe₃O₄) on the surface of the metal (for example, carbon steel).
DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
The length can be individually adjusted from 450 to 1000 mm depending on the depth of the customer's tank.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of hydrazine solution to the boiler feedwater reacts chemically with the dissolved oxygen (O₂) in the feedwater to form nitrogen and water.
The AZ series slurry pump is an extension of the HTZ pump product line, which has been successfully developed by our company based on many years of technical experience and taking into account advanced foreign technologies.
An automated system of equipment for accurately dosing certain chemical reagents into the water being treated (“source water”). The main task is “accurate, continuous, automatic” dosing of reagents, replacing the unstable and ineffective manual method.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
This pump can operate without water, is not subject to rapid wear, is easy to assemble and maintain, and has a long service life.
