Circulating cooling tank design ensures 24-hour water-free operation.
1. This pump can operate without water, is not subject to rapid wear, is easy to assemble and maintain, and has a long service life.
2. Unique shaft seal design - self-lubricating Teflon BellowSeal is used inside.
3. High acid resistance, high alkali resistance, high corrosion resistance. Manufacturing materials: CFRPP, GFRPP and PVDF.
4. A check valve (foot valve) should be installed at the inlet to prevent foreign particles from entering, and a check valve at the outlet should be installed to prevent instantaneous backflow when stopped, which may cause damage to the pump.
The product is suitable for low-viscosity liquids that do not contain solid particles or fibers; chemical industry; pharmaceutical, pesticide, acid washing and dye production; paint and varnish industry; metallurgy, pulp and paper and galvanic industries; Suitable for highly corrosive media of any concentration, such as hydrochloric acid, nitric acid, sulfuric acid, phosphoric acid, acids, saline solutions, strong oxidizing agents, organic solvents, etc.
◆ Liquid temperature: –15 °C to +90 °C
◆ Flow range: see pump parameters
◆ Maximum pressure: see pump parameters
◆ Maximum medium density: 135 × 10³ kg/m³
◆ Ambient temperature: no more than +40 °C
◆ Maximum altitude above sea level: 3000 m
◆ Maximum system pressure: 10 bar
When the specific gravity and viscosity of the pumped liquid is high, the shaft power increases, so it is necessary to use an electric motor that matches the shaft power.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
DN15–DN800; PN16–PN100, Class150–Class600; cryogenic steels LF2, 304,316; operating temperature -196℃…+80℃; extended anti-freeze rod, flanged/welded connection.
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
The static seal between the suction section, middle section and discharge section of the pump is made of metal seal and double O-ring seal, and the pump shaft seal uses high-performance hemp packing or mechanical seal, which is safe and reliable.
The centrifugal chemical pump made of fluoroplastic type FSC (hereinafter referred to as the pump) developed by our company is a single-stage, single-pass cantilever centrifugal pump. It is manufactured using superior hydraulic design and advanced, proven processing technology.
DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
The fluoroplastic FOB magnetic pump is a chemical process pump that uses the principle of modern magnetic mechanics and transfers force non-contactly using permanent magnets. As the motor rotates, the outer rotor (outer magnetic system) drives magnetic lines of force that pass through the thermowell and cause the inner rotor (inner magnetic system) and impeller to rotate synchronously.
Technical parameters: working depth under water up to 15 m, productivity up to 200 m³/h, pressure up to 24 bar.
Self-priming magnetic pumps of the ZFT series fully combine the advantages of a magnetic pump and a self-priming pump: they have a self-priming function, but at the same time they do not have a shaft seal, they use transmission through a magnetic coupling, which completely eliminates the phenomenon of drip leaks.
Although reagent dosing plants in the petroleum and petrochemical industries do not directly produce products, they are an indispensable “guardian” and “lubricant” in the entire production chain.
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
