The AZ series slurry pump is an extension of the HTZ pump product line, which has been successfully developed by our company based on many years of technical experience and taking into account advanced foreign technologies. This is an improved version of pump types such as TWZ and ZBJ, with high capacity for passing fibers and solids, smooth running and ease of maintenance. It can pump slurries with a concentration of less than 6% and other types of slurries with a solids content of less than 30%. Suitable for work environments such as pulp and paper industry, metallurgy, salt mining, wastewater treatment and power plants.
1. Alkalis and inorganic salts: mother solution of ammonium salt obtained by ammonia and combined alkaline methods, soda ash, electrolyte, caustic alkali, chlorides and hypochlorites obtained by membrane alkaline and ion exchange methods, alkali metal sulfides, sulfates, hydrogen peroxide, etc.
2. Non-ferrous metallurgy: electrolyte for copper and nickel electrolysis, sodium aluminate solution for aluminum production, acid mist for cobalt production, pulp for zinc production, ammonium aluminate solution for alum production, acid mist and sulfur solution for gold production, etc.
3. Steel industry: electroplating, pickling, electrophoresis paint, etc.
4. Acid production: hydrochloric acid, nitric acid, sulfuric acid, phosphoric acid, phosphate slurry, acetic acid, etc.
Petrochemical industry: refining, cracking, oil separation, butadiene, alkylbenzene, methanol.
5. Production of synthetic fibers and plastics: polyester, dichloromethane, epichlorohydrin, trichlorpropane, polyvinyl chloride, dimethylformamide, etc.
6. Pulp and paper industry: pulp pulping liquor, green liquor, white liquor, concentrated black liquor, bleaching liquor.
7. Fertilizer production: urea, ammonium nitrate, ammonium bicarbonate, ammonium chloride, ammonium phosphate, potassium chloride, potassium sulfate, etc.
8. Fermentation industry: intermediates, lactic acid, citric acid, food additives, beer, various fermenting pulps, etc.
9. Environmental protection: various chemicals, acidic and alkaline wastewater, etc.
The most common materials for wetted flow components are: 304, 321, 316L, 310Cu, 0Cr25Ni16 (duplex stainless steel), 20# alloy, 904L, TA2 (titanium), Ti/Pd (titanium with palladium), Ni (nickel), Monel alloy.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
The 3HS25 series high-pressure three-screw pump is designed for use in the machine tool industry and is suitable for pumping various cooling and lubricating materials (coolants, emulsions, cutting fluids, etc.) required for machine tool processing. Provides precise washing, cooling, lubrication, crushing and chip removal of workpieces and tools, extending tool life and improving machine precision.
This series of chemical pumps for corrosive liquids are vertical, the suction and discharge pipes of the pump have the same diameter, and their center lines are on the same horizontal line and orthogonal to the vertical shaft.
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
DN50–DN2600; PN10–PN63, Class150; cryogenic stainless steel body, special seal for low temperatures; t=-196℃…+60℃, extended rod, wafer and flange versions.
Although reagent dosing plants in the petroleum and petrochemical industries do not directly produce products, they are an indispensable “guardian” and “lubricant” in the entire production chain.
The fluoroplastic FOB magnetic pump is a chemical process pump that uses the principle of modern magnetic mechanics and transfers force non-contactly using permanent magnets. As the motor rotates, the outer rotor (outer magnetic system) drives magnetic lines of force that pass through the thermowell and cause the inner rotor (inner magnetic system) and impeller to rotate synchronously.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Using the most advanced welding technology, KQDP/KQDQ has high corrosion resistance and high efficiency. Efficiency can be 5-10% higher than cast pumps.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
The length can be individually adjusted from 450 to 1000 mm depending on the depth of the customer's tank.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
MHT series slurry pump is a specialized equipment developed by our company for clay mining industry (Pengrun), abrasive and grinding industry, power plant desulphurization and bauxite slurry conveying in aluminum smelter.
