Diameter: DN15–DN1200; Pressure: PN16–PN160, Class150–Class2500; Housing material: WCB, stainless steel 304/316, duplex steel; Connection: flange, threaded, welded, clamp; Drive: manual, pneumatic, electric, hydraulic.
Ball valve rotates 90°, fast opening/closing, tight sealing, low flow resistance, compact structure, easy maintenance, suitable for shut-off and distribution of media, corrosion and abrasion resistant.
Petrochemistry, natural gas, water supply and wastewater disposal, metallurgy, pharmaceuticals, food industry, coal chemistry.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Using the most advanced welding technology, KQDP/KQDQ has high corrosion resistance and high efficiency. Efficiency can be 5-10% higher than cast pumps.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of ammonia water (NH₂OH) or liquid ammonia (NH₃) to the boiler feed water to increase the pH of the feed water (usually maintained in the range of 8.8–9.3 or depending on specific conditions) allows the formation of a stable protective film of magnetite (Fe₃O₄) on the surface of the metal (for example, carbon steel).
The fluoroplastic FOB magnetic pump is a chemical process pump that uses the principle of modern magnetic mechanics and transfers force non-contactly using permanent magnets. As the motor rotates, the outer rotor (outer magnetic system) drives magnetic lines of force that pass through the thermowell and cause the inner rotor (inner magnetic system) and impeller to rotate synchronously.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
An automated system of equipment for accurately dosing certain chemical reagents into the water being treated (“source water”). The main task is “accurate, continuous, automatic” dosing of reagents, replacing the unstable and ineffective manual method.
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
Regular stock of frequently used spare parts and wear parts to ensure timely delivery in case of urgent need.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
This pump can operate without water, is not subject to rapid wear, is easy to assemble and maintain, and has a long service life.
SKF bearings, a world famous brand, provide more stable performance.
KQGV frequency controlled digital integrated water supply equipment has many advantages: safe water supply, reliable operation, water saving and hygiene, high efficiency and energy saving, intelligent monitoring and control.
DN40–DN3000; PN6–PN100, Class150; Material: cast iron, stainless steel 304, rubberized body; Connection type: wafer, flange; Drive: manual, pneumatic, electric.
