Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type ensures more ideal pump performance during operation.
The plunger pump head has a simple structure, is economical and has high dosing accuracy. It is important to select the correct seal and ensure proper maintenance. Horizontal self-alignment between plunger and seal ensures little wear between the two. The plunger is made of stainless steel, oxidized ceramics; Oxidized ceramics have the characteristics of corrosion resistance, high hardness and wear resistance.
◆ Flow range: 0.8–29000 l/h
◆ Maximum pressure: 50 MPa
◆ Dosing accuracy: ±1%
◆ Medium viscosity: 0–800 mm²/s
◆ Temperature of the pumped medium: up to 450 °C
The three-chamber solution preparation unit is designed specifically for dissolving and preparing solutions of high molecular weight polymer – polyacrylamide (PAM). Mainly used for flocculation treatment of industrial wastewater, flocculation in sludge dewatering, drinking water treatment, and wastewater treatment in chemical, pulp and paper and other industries.
The length can be individually adjusted from 450 to 1000 mm depending on the depth of the customer's tank.
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
SKF bearings, a world famous brand, provide more stable performance.
An automated system of equipment for accurately dosing certain chemical reagents into the water being treated (“source water”). The main task is “accurate, continuous, automatic” dosing of reagents, replacing the unstable and ineffective manual method.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
KQGV frequency controlled digital integrated water supply equipment has many advantages: safe water supply, reliable operation, water saving and hygiene, high efficiency and energy saving, intelligent monitoring and control.
DN20–DN600; PN16–PN160, Class150–Class900; WCB Housing, 304,316; flange/welded connection; membrane pneumatic or electric drive.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
Technical parameters: minimum flow rate up to 0.03 l/min, pressure up to 24 bar
The RUB Corrosion and Wear Resistant Slurry Pump is a cantilever, single stage, single stroke centrifugal pump specifically designed for pumping corrosive media containing fine solids.
Thanks to the reciprocating movement of the plunger, the working medium is directly sucked in or pumped out. Since the plunger and seal are in direct contact with the fluid, the correct choice of plunger material and seal type will ensure more ideal pump performance during operation.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
