DN25–DN2000; PN10–PN420, Class150–Class2500; Housing: carbon steel, stainless steel, cast iron; Connection: flange, welding; Drive: flywheel, electric drive, pneumatic drive.
Затвор перемещается вертикально, при полном открытии сопротивление потоку отсутствует, прямой проход, не используется для дросселирования, выдерживает высокие температуры и давления.
Теплоэнергетика, городское водоснабжение, магистральные нефтегазовые трубопроводы, очистка стоков, горная промышленность, теплосети.
Independent cutting module, good cutting ability, not prone to clogging. If the particles can pass through the suction hole, they will be easily crushed. Transporting lightly contaminated wastewater, cesspools, hospital wastewater and other media containing long and thin fibers. Large particles cannot be transported.
The unique design of the two-channel impeller, the spacious pump body, ensures easy passage of solid objects, the fibers do not get tangled, which makes the pump most suitable for pumping wastewater.
The dosing device, specifically designed for wastewater and sewage treatment, is a critical component of the “accurate dosing and mixing of reagents” in the entire water treatment system. It automatically dispenses specific chemicals into wastewater to achieve physical, chemical or biological treatment goals.
The static seal between the suction section, middle section and discharge section of the pump is made of metal seal and double O-ring seal, and the pump shaft seal uses high-performance hemp packing or mechanical seal, which is safe and reliable.
CAD technology is used to redesign the design multiple times to ensure that the submersible pump body and impeller are perfectly matched, allowing fibers and debris to pass through easily without becoming tangled or clogged.
The FSC (single stage, single stroke) PTFE alloy centrifugal chemical pump - hereinafter referred to as "FSC centrifugal pump" - is designed and manufactured in accordance with international standards and based on non-metallic pump technology.
Technical parameters: maximum capacity 400 m³/h, maximum pressure 24 bar
The outlet diameter and the inlet diameter are the same. SKF bearings, a world famous brand, ensure more stable operation.
Technical parameters: capacity up to 300 m³/h, pressure up to 48 bar
The simple modular dosing unit is a complete plug-and-play dosing device. It is designed, manufactured, assembled and tested at the manufacturing plant in accordance with the customer's technological requirements, and then completely delivered to the site.
The all-plastic pneumatic diaphragm pump can pump not only fluid liquids, but also transport some non-fluid media. Compared with self-priming pumps, submersible pumps, shielded motor pumps, clay slurry pumps and solids pumps, this model has many advantages.
DN25–DN1200; PN16–PN160, Class150–Class900; cryogenic steel LF3, stainless steel; t=-196℃…+120℃, extended rod, flanged and welded connection.
This series of horizontal centrifugal pumps are horizontal, radial split, open back, single stage, single suction volute type centrifugal pumps. The design of the impeller is closed type. The pump body has an axial suction pipe, a discharge pipe located on top, and a foot support.
Technical parameters: capacity up to 100 m³/h, pressure up to 48 bar
Diameter: DN15–DN1200; Pressure: PN16–PN160, Class150–Class2500; Housing material: WCB, stainless steel 304/316, duplex steel; Connection: flange, threaded, welded, clamp; Drive: manual, pneumatic, electric, hydraulic.
Equipment for water-chemical treatment, which is critical in the steam-water cycle of thermal power plants, industrial boilers, etc. Adding microdoses of hydrazine solution to the boiler feedwater reacts chemically with the dissolved oxygen (O₂) in the feedwater to form nitrogen and water.
